Sunday, 6 August 2017

Should I choose a Canon 550D or a Sony DSLR-A580?



I am planning to buy a Canon EOS 550D with its Kit Lens (18-55 mm) and a prime lens (50 mm 1.8) with my main intention of clicking portrait and landscape pictures. Just yesterday I came across Sony DSLR-A580 and noticed that the features were a bit better for the Sony as compared to the Canon. I referred to this link to understand the ups and downs of both the DSLR's. I have personally used the Sony A580 (with prime lens 50 mm 1.8 and telephoto lens Sigma 18-200 mm) for more than 3 months and I am quite impressed with the quality. I have even used the Canon 550D in stores to get a feel for the quality and in stores I felt Canon was better. I understand that Sony would be a bit more expensive than the Canon with the same setup, but is there really that much of a difference in quality of images and video?



Answer




There's no single answer to this question, because it comes down to a lot of personal factors. However, you won't go wrong with either choice. I highly recommend looking at How much do lens lineups vary across DSLR platforms? and considering which system might fit your vision of your working style as a photographer — but not stressing about it too much.


The difference in image quality in an absolute sense is very small. That's because all modern DSLRs offer excellent, amazing image quality, and any debate is between levels of A-grade. These differences are magnified because camera review sites wouldn't get very many hits if they just kept focusing on that positive story — instead, they have a huge incentive to magnify small differences into distinguishing factors.


The Snapsort link you gave provides a good example of this. While Snapsort provides some useful comparison information, one thing it says is that the Sony camera provides "More than 20% better image quality". This is clearly preposterous. The numbers they use — given as the bare "80.0 vs 66.0" — are from some highly-technical sensor measurement scores, which demonstrate some small clinical aspects of image quality, and which barely relate in any way to the actual potential quality of results.


The claim that one model "Distinguishes more than 3x more colors" is also absurd — there's a technically-measured bit depth of "23.8 bits vs 22.1 bits", which both does not correspond usefully to the practical dynamic range of the sensor nor have anything to do with "number of colors distinguished". The higher value is better, but when it's presented as "3× better" that sounds like a big deal — when in reality, it's a difference that humans, even expert humans, can't possibly distinguish without taking careful measurements.


So, yeah. Don't worry too much about these things.


That's assuming there's no deal-breaker lack of functionality for you in one model or another. For example, if you absolutely must have 24p video for a project, this particular Sony model won't do.


photoshop - How can I use CMYK values to white balance skin?



I recently heard a photographer mention that they:



...adjusted the white balance using the CMYK method



I did a bit of searching on this and found different resources claiming to use formulas such as C+M+Y = 5 * K or that you need to have a certain percentage of each to have proper skin tones.


I'm more familiar with simply adjusting the white balance in Adobe Lightroom using the dropper tool on a grey or neutral part of the image. How would I adjust the white balance by the CMYK method properly in Photoshop(I am assuming you can't use this method in Lightroom)?




Saturday, 5 August 2017

tripod - Is it possible to get a larger screen for live view, for precise manual focus?


I've been doing some test macro shots lately and it's been a pain to focus sharp. The macro lens already minimizes DoF and makes things hard but I've been thinking of an external screen that I can pan/zoom to check focus quality.


I haven't been able to find much, probably because I don't know the keywords to search for. I hope there is something on the market.


Is it?


At the moment I'm using the live view and the +/- keys to magnify the live view in order to check the focus quality.


What would be better alternatives considering I will use a tripod?



Answer



You are looking for an HDMI monitor.


Here you go, BHPHoto has 116 results for that.


lens - Canon EF-S 55-250mm f/4-5.6 IS II causes Err 01 only when zoomed beyond 135mm


I am getting the following error with my EF-S 55-250mm f/4-5.6 IS II lens only when I zoom it beyond 135mm:



Err 01



Communications between the camera and lens is faulty.
Clean the lens contacts.



Can anyone tell me what can be the issue?




Friday, 4 August 2017

equipment recommendation - What's a relatively low priced camera that performs well in low light condition?



I'm looking to buy a new (digital?) camera for regular photo-taking. I'm not an enthusiast and know next to nothing about photography. I would like the camera to be relatively low priced (for example, think under $300 in 2012), good in low-light conditions and able to produce good photos. I'm not experienced with manual modes so I would like it to be able to take good photos on auto.




Thursday, 3 August 2017

off camera flash - Shooting glass product with embossment


Have been going crazy trying to wrap our heads around our problem for the past 2 weeks trying to find the right equipment settings, position our camera and lights for photoshoot. We need to take pictures of glass jars with embossment over a white background so it can be easily swapped for transparent color and turned to .png image.


Our equipment is Canon EOS 5D Mark II and 2 flashes - Raylab Sprint II RTD-400 SS Creative Kit.



Problem is that embossment on the jars is not very sharp itself and thus when we photoshoot it tends to become invisible. We have tried to shoot with the background lighting set up behind our white background and front lighting set at the same time pointing towards the jar on the same level as the camera but get very poor results:


enter image description here


The embossment is being visible and the whole jar seems to be over-exposed or there is some problem with contrast and some problem with how object volume is perceived from the photo. We can't really identify the problem with this photo and tell what is wrong with it so any help with pointing that out is appreciated.


In the contrary we have tried other setting for our photo which is putting our 2 flashes on both sides of the object so it would form 45 degrees with both camera and the object itself looking on the object from the front side. If we got it right it is called accent lightning:


enter image description here


With this setting the embossment visibility is very poor but the overall object perception seems better. However flash create very strong effect on the jar itself which is not very pleasant for the final result as well as we want it to put less accent on the flash showing up on the jar body just enough to show the object shape.


What we are trying to reproduce can be easily depicted by the following picture: enter image description here


Please suggest us what changes to our light scheme we should make to get as close to the result as possible.


P.s. Please excuse us for probably noob question. Any help is highly appreciated!




Which characteristics should a wide-angle lens have for astrophotography?


I'm looking to buy a wide-angle lens for astrophotography, specifically on a Canon 450D (Rebel XSi). Which characteristics should I be looking for in a lens?




Why is the front element of a telephoto lens larger than a wide angle lens?

A wide angle lens has a wide angle of view, therefore it would make sense that the front of the lens would also be wide. A telephoto lens ha...